Description
Lens Technology Enabled™ Multi-Beam Base-Station Antenna perfect for 9 sector LTE cell site deployments, utilizes a patented spherical lens design with 3 isolated low-frequency (617-896MHz) cross-polarized beams. Each beam has 4 cross-polarized ports for supporting 4×4 MIMO.
RET is available from 0 to 15° for each beam.
Specifications
Technical Specifications Per Beam |
|
| Frequency | 617-896MHz |
| Gain | 18dBi |
| VSWR | <1.5:1 |
| Polarization | Dual Slant ±45° |
| Horizontal Coverage | 120° |
| Horizontal Beamwidth (10dB level) | 43° |
| Horizontal Beamwidth (3dB level) | 25° |
| Vertical Beamwidth (3dB level) | 15° |
| Beam Cross-over | 10dB typical |
| Total Number of Beams | 3 |
| Number of Ports per Beam | 4 |
| Number of Ports Total | 12 |
| RET Per Cross-Pol | 0° to 15° |
| Azimuth Sidelobe level | <-15dB |
| USLS (Upper Sidelobe Suppression) | <-15dB |
| Front to Back Ratio | >28dB |
| Isolation Port to Port – Polarization | >28dB |
| Isolation Port to Port – Beam | >26dB |
| Power Rating | 150W per port |
| Intermodulation | <-153dBc |
| Impedance | 50 Ohm |
| Connector Quantity and Type | 12 X 4.3-10 female |
Mechanical Data |
|
|
Dimensions (H x W x D)
|
241.8 x 93.4 x 108.4 cm |
| 95.2 x 36.8 x 42.7 inch | |
|
Antenna Weight
|
95kg |
| 209.4lbs | |
| Radome Material | Fiber Glass |
|
Mounting
|
Standard position pipe mount |
| Compatible Pipe Diameter | |
| 6.1 – 11.4 cm / 2.4 – 4.5 inch | |
Environmental Ratings |
|
| Humidity | 95% RH @ +30°C |
| Temperature | -40°C to +70°C |
|
Wind Load @ 150km/h
|
Frontal: 1584/356.1 |
| Lateral: 2371/533 | |
| Rear: 1858/417.7 | |
Pattern Results |
|
| Horizontal Pattern (800MHz)
|
Vertical Pattern at 0° tilt and 15° tilt (800MHz)
|
