Description
Lens Technology Enabled™ Multi-Beam Antenna perfect for up to 6 sectors CRAN, Outdoor DAS and Small Cell deployment. This antenna is capable of 2×2 MIMO with a coverage footprint of 360°. Each beam has two full-band ports. 3.3GHz – 4.2GHz. Factory-installed tilt settings are available for 0° & 30°.
Specifications
Technical Specifications Per Beam |
|
| Frequency | 3300 MHz – 4200 MHz |
| Gain | 14dBi |
| VSWR | <1.5:1 |
| Polarization | Dual Slant ±45° |
| Horizontal Coverage | 360° |
| Horizontal Beamwidth (10dB level) | 60° |
| Horizontal Beamwidth (3dB) | 34° |
| Vertical Beamwidth (3dB) | 34° |
| Beam Cross-over | 10dB typical |
| Total Number of Beams | 6 |
| Number of Ports per Beam | 2 |
| Number of Ports Total | 12 |
| Tilt Per Cross-Pol | 0°, 30° |
| First Sidelobe Level | <-15dB |
| Front to Back Ratio | >28dB |
| Isolation Port to Port – Polarization | >28dB |
| Isolation Port to Port – Beam | >28dB |
| Power Rating | 100W per port |
| Intermodulation | <-153dBc |
| Impedance | 50 ohm |
| Connector Quantity and Type | 12 x 4.3-10 female |
Mechanical Data |
|
| Dimensions (H x W x D) | Cylindrical Design
Diameter: |
| Antenna Weight | 6 kg | 13.2 lbs |
| Radome Material | Fiber Glass |
| Mounting | 1 position pipe holder, bottom or side mountable.Compatible pipe diameter: 6.1 – 11.4 cm 2.4 – 4.5 inch |
Environmental Ratings |
|
| Humidity | 95% RH @ +30°C |
| Temperature | -40°C to +70°C |
| Wind load @ 150km/h | N /Ibf
Frontal: 100.3/22.5 |
Pattern Results |
|
| Horizontal Pattern (3.5GHz)
|
Vertical pattern at 0° tilt and 30° tilt (3.5GHz)
|
